• treatment of partially hydrolyzed polyacrylamide wastewater

    Treatment of partially hydrolyzed polyacrylamide wastewater

    The average molecular weight of the HPAM was about 2.2 × 10 7 and it was 10% hydrolyzed. The HPAM wastewater in this study was dispensed to simulate the wastewater of Gudao Zhongyi block, China. The composition of the wastewater was as follow: COD Cr 1500 mg L −1-1700 mg L −1, HPAM 500 mg L −1, pH 6.5–7.5, salinity 6264 mg L −1.

  • anionic and cationic polyacrylamide used for industrial

    Anionic and cationic polyacrylamide used for industrial

    Anionic and cationic polyacrylamide used for industrial wastewater treatment. Main Production: 1. Oilfield Chemicals, Oilfield chemical is a general germ,The oilfield chemicals we can supply include anionic polyacrylamide used for oil drilling mud additives , drag reduction agent and EOR(enhanced oil recovery)agent .

  • wastewater used anionic polyacrylamide|industrial

    Wastewater Used Anionic Polyacrylamide|Industrial

    Wastewater Treatment(Primary Clarification, Secondary & Tertiary Treatment, Dissolved Air Floatation) Specification of Anionic Polyacrylamide APAM For Waste Water(Solid Granule) CAS No.:9003-05-8 MF:【(C3H5NO)n】

  • anionic polyacrylamide coagulant aid for sewage treatment

    anionic polyacrylamide coagulant aid for sewage treatment

    Improvement of coagulation–flocculation process using. A physicochemical treatment (coagulation–flocculation) was applied to a slaughterhouse wastewater, using anionic polyacrylamide as coagulant aid to improve the settling velocity of the flocs formed with the coagulants used: ferric sulphate, aluminium sulphate and polyaluminium chloride.

  • (pdf) removal of anionic surfactants in detergent wastewater

    (PDF) Removal of Anionic Surfactants in Detergent Wastewater

    Research shows that the coagulation of industrial wastewater is an effective method of removing anionic surfactants (Aboulhassan et al. 2006; Mahvi et al. 2004). Coagulation in this case involves

  • anionic polyacrylamide industrial wastewater treatment sewage

    anionic polyacrylamide Industrial wastewater treatment Sewage

    anionic polyacrylamide Industrial wastewater treatment Sewage polyacrylamide. Main Production: 1. Oilfield Chemicals, Oilfield chemical is a general germ,The oilfield chemicals we can supply include anionic polyacrylamide used for oil drilling mud additives , drag reduction agent and EOR(enhanced oil recovery)agent .

  • anionic/polymer b-40 for wastewater treatment | beckart

    Anionic/Polymer B-40 for Wastewater Treatment | Beckart

    Anionic / Polymer B-40. This product is a highly charged anionic polymer in dispersion. When inverted, it will serve as an effective flocculant in many liquid/solids separation systems, including clarification, thickening and dewatering.

  • treatment of partially hydrolyzed polyacrylamide wastewater

    Treatment of partially hydrolyzed polyacrylamide wastewater

    The average molecular weight of the HPAM was about 2.2 × 10 7 and it was 10% hydrolyzed. The HPAM wastewater in this study was dispensed to simulate the wastewater of Gudao Zhongyi block, China. The composition of the wastewater was as follow: COD Cr 1500 mg L −1-1700 mg L −1, HPAM 500 mg L −1, pH 6.5–7.5, salinity 6264 mg L −1.

  • wastewater used anionic polyacrylamide|industrial

    Wastewater Used Anionic Polyacrylamide|Industrial

    Wastewater Treatment(Primary Clarification, Secondary & Tertiary Treatment, Dissolved Air Floatation) Specification of Anionic Polyacrylamide APAM For Waste Water(Solid Granule) CAS No.:9003-05-8 MF:【(C3H5NO)n】

  • (pdf) removal of anionic surfactants in detergent wastewater

    (PDF) Removal of Anionic Surfactants in Detergent Wastewater

    Research shows that the coagulation of industrial wastewater is an effective method of removing anionic surfactants (Aboulhassan et al. 2006; Mahvi et al. 2004). Coagulation in this case involves

  • phpapolymer |partially hydrolyzed polyacrylamide|anionic

    PHPApolymer |Partially Hydrolyzed Polyacrylamide|anionic

    Partially Hydrolyzed PolyAcrylamide-PHPA is an encapsulating polymer that is normally used in conjunction with potassium chloride to provide a high degree of shale inhibition. The polymer is anionic, attaches itself to the positively charged edges of clay platelets, thus binding the particles together.